How To Clean Clear Phone Case? An Ultimate Guide 2024

Key Takeaways

• A clear cover is like a window into your iPhone's elegant design. However, after some time, the window might get hazy and dirty. Learn about the essential supplies you will need and a step-by-step step-by-step guide on how to clean clear phone case.
• There are several good reasons why you should clean your phone case. Learn more about how to protect yourself from germs and frequency of usage.

What Products Do You Need?

• Mild soap or detergent
• Mild dish soap or hand soap
• Warm water
• Soft microfiber cloths or sponges
• Microfiber towels
• Soft-bristled toothbrush
• Baking soda
• White vinegar

Optional supplies:

• Isopropyl alcohol (rubbing alcohol)
• Cotton swabs
• Disinfectant wipes

Prepare the supplies. Source: Totalleecase

How To Clean Clear Phone Case

Plastic Or Silicone Phone Cases

Step 1: Remove the case from the phone

To thoroughly clean your silicone phone case, you must first remove it. Carefully stretch a corner of your case to begin removing it from your phone. Keep lifting the plastic or silicone case around the phone's perimeter until you can completely remove it from your phone.

It is critical not to pull the silicone too forcefully since this might damage or tear it.

Step 2: Prepare a cleaning solution

In this step, combine 1-2 drops of dishwashing liquid with 1 cup (240 mL) of warm water. This cleaning solution is the finest way for cleaning clear phone cases made of silicone or plastic.

You should add dishwashing liquid to a cup of warm water to ensure that the soap dissolves correctly. Stir the mixture until it becomes somewhat foamy.

Step 3: Apply your phone case to the cleaning solution

Dip a clean toothbrush in the soap mixture for around 1-2 minutes before applying it to your silicone case. If your clear case has a tenacious stain, soak it for a little longer or until it is completely removed.

Apply your phone case to the cleaning solution. Source: Muk Barcelona

Scrub the case in tiny, circular movements. Focus on stains or caked-on grime to get your phone case as clean as possible. Moreover, you may dip the toothbrush back into soapy water every few seconds to guarantee a thorough cleaning.

Step 4: Sprinkle a pinch of baking soda

If your phone case has tenacious dirt, a tiny sprinkle of baking soda directly on the case may help remove it. Baking soda's naturally abrasive texture and chemical qualities make it suitable for household cleaning tasks such as scrubbing and scouring dirt, deodorizing unpleasant smells, and removing stubborn stains. 

Apply a tiny quantity of baking soda immediately to the dirty area. Continue to scrape the case with your toothbrush.

Step 5: Rinse the case under water

When you have finished cleaning, rinse the soapy liquid off your phone in the sink. Remember to use warm water rather than hot or cold water. Unlike cold water, which may be less effective, warmth aids in the breakdown of residue from dust, fingerprints,  or spills, making it simpler to wipe away and fully clean. 

Carefully rub the case while rinsing to remove any soap residue.

Step 6: Let the case dry

Putting your phone back in its case while it is still damp may cause harm to the phone and enable bacteria to grow within. Thus, the last step on how to wash clear phone case is to dab your phone case with a paper towel to eliminate as much moisture as possible. 

Let the case dry. Source: Tom’s Guide

Following that, leave your case dry for about an hour to ensure that it is dry and ready for usage. If you are short on time, try drying your phone case for several seconds using a blow dryer on the lowest setting.

Clear Phone Cases

Light Clean

How to clean clear phone case? Generally, you can use soap, water, and a microfiber cloth. To avoid hurting your phone, take it from its case before you clean it.

• Fill a bowl with warm water and about 2-3 drops of mild dish soap. Carefully stir the water. 
• Moisten your microfiber cloth and scrub the case. Remember to give extra attention to hard-to-reach areas such as the camera lens, buttons, display area, openings, and seams. 
• Rinse and repeat if necessary, then rinse well and dry with a towel. Allow 1 to 2 hours for any extra moisture to evaporate before returning it to your phone.

Medium Clean

If you don't know how to clean a brown clear phone case due to heavy dirt, try baking soda. It is a common baking ingredient, but thanks to its abrasive nature, it also makes an excellent natural cleaning. 

After removing the case from your phone, sprinkle baking soda directly on discolored places to spot clean or on one complete side of the yellowing case to clean the entire item. Wet a soft-bristled toothbrush and start scrubbing baking soda into the case. 

You don't need much water. The baking soda should have the consistency of a paste, so alter the water-to-baking soda ratio as required. 

How to restore a clear phone case? Source: Wikihow

Once you have finished cleaning, rinse and repeat on the other side of your phone case. Then, dry with a microfiber towel and let your case sit for 1 to 2 hours before placing it back on your phone to ensure that all of the water has drained. 

Deep Clean

Immerse your case in a kitchen container filled with about 1 cup of liquid. Take your phone out of its case and place it aside. Put your case in the container and add two tablespoons of baking soda. Following that, add one cup of distilled white vinegar. Remember that it will fizz.

Ensure you thoroughly submerge your phone case in the solution, then soak for 1 to 2 hours. The time that it requires to clean will vary depending on how yellow your clear phone case has become. 

Rinse your phone case well, dry it with a towel, and allow it to air dry for a few hours before putting it back on your phone. 

Spot Clean

Regarding how to clean your clear phone case, rubbing alcohol is an ideal ingredient. Yet, you should double-check with the manufacturer or test a tiny, inconspicuous section of your case before cleaning it, as alcohol might discolor some products.

Take your phone from its case. Apply a small quantity of alcohol to a microfiber cloth and scrub your case, especially any hard-to-reach areas. When done, wipe it off with a different microfiber towel to remove any remaining alcohol. 

White Phone Cases

You can clean any white phone cases in the same way as other plastic ones. White cases, on the other hand, get dirt more quickly and leave quite visible stains behind. Below are some additional steps you may take to remove stains from white plastic phone cases.

• Prepare the soaking solution: Fill a bowl with warm water, then add one teaspoon of bleach and one spritz of dish soap. Use only a small amount of bleach. Too much might damage or discolor silicone cases. Stir the solution carefully to mix it.

Clean white phone case. Source: Microfiber Wholesale

• Soak the case: Dip the phone case in the solution and soak for several minutes, no more than 5-10. Bleach will aid in removing tough stains and disinfecting the case, while dish soap will dissolve oils and dirt.
• Scrub the case: After soaking, use a soft cloth or sponge to clean the phone case. A soft-bristle toothbrush might be useful for removing difficult-to-reach areas or tenacious stains. Try not to scrub too vigorously, especially if the case is silicone, which is susceptible to strong treatments.
• Rinse thoroughly: After washing the phone case, thoroughly rinse it with clean, warm water. Be careful to remove any bleach and soap residue since leftover bleach might cause further harm to the case or harm your skin.
• Dry the case: Before reinstalling your phone, wipe the case with a gentle, dry cloth and allow it to air dry entirely.

Rubber Phone Cases

Generally, you can clean your rubber phone cases in good condition in the same manner as plastic or silicone ones, so apply the steps described above. If your rubber case is neglected and caked with dirt and body oils, here are some important tips that you should consider:

• Avoid harsh chemicals: Don’t use strong cleaning agents such as ammonia, bleach, or other harsh chemicals. They can degrade the rubber material over time, resulting in cracking, discoloration, or weakening.
• Avoid scrubbing too hard: Rubber cases might be susceptible to excessive force. Scrubbing too forcefully might leave scratches or wear down the rubber surface. Thus, you should use soft towels, sponges, or toothbrushes with soft bristles to carefully clean the case. 

Don’t scrub too hard

• Don’t soak the case for too long: If you are soaking the case in soapy water, do so for only 10-15 minutes. Prolonged exposure to water may harm the rubber, especially if the case has minor fractures or cuts.
• Air dry completely: Before placing your phone back inside, make sure the case is completely dry. Trapped moisture can cause mildew or mold to grow on your phone, potentially damaging it. Place the case flat in a well-ventilated area to dry.
• Avoid extreme heat or sunlight: Avoid using hot water or exposing your case to direct sunlight when drying. Heat may cause rubber to warp or deteriorate, resulting in cracks and a loss of flexibility.

Wooden Phone Cases

Step 1: Remove the phone case

Before you begin cleaning, remove your phone from the wooden case to avoid getting any water or cleaner on your device.

Step 2: Dust the surface

Run a soft microfiber cloth over its inside and outside to remove any dust, filth, and debris. Using another clean one, go over the phone inside and out again. Microfiber is the perfect material for your wood phone case since it absorbs dirt and oils and does not create sharp scratches or abrasion.

If there are sticky or unclean patches that you cannot successfully clean with a dry microfiber cloth, try using the microfiber cloth on those areas. 

Step 3: Clean your wooden phone case

Unless it works as well as you expected and the gunk remains stubbornly adhered, mix a few drops of white vinegar into the water on the microfiber. But make sure there is not too much moisture, and work the place until it's gone. Vinegar has antibacterial characteristics that can help eliminate bacteria on the phone's earpiece.

Clean your wooden phone case. Source: Kerf Case

Furthermore, you can also clean the interior of the phone case, which is constructed of polycarbonate, using disinfectant solutions, such as disinfectant wipes. They are as safe to use on phone surfaces; alternatively, you can use an alcohol-based cleaner. Always handle your phone with clean hands, and never leave it on common surfaces. 

Step 4: Dry the case

Finally, allow your wooden phone case to air dry for a few hours after washing before putting your phone back into it. Doing so ensures that any residual moisture evaporates entirely. Avoid intense sunlight and heat sources, which can cause the wood to break.

Step 5: Polish or condition the case (Optional)

If your wooden phone case has a natural finish, you may use a tiny quantity of wood polish or conditioner to improve the appearance and protect the wood. Make sure you use a product intended exclusively for wood and follow the manufacturer's directions.

Leather Phone Cases

Cleaning a leather case differs significantly from cleaning a conventional plastic or rubber one. 

The first thing you should remember when cleaning a leather phone case is to never use liquids directly on the case. Leather is very porous and should be cleaned with a damp cloth; it should never be wet! 

In addition, you should keep the solution basic. Any dyed or colored cleaning solution may stain the leather, so use a mild hand soap that is delicate on both the leather case and your skin. Leather cleaner might also be beneficial. Follow the steps below:

• Remove any large debris: Use a dry microfiber cloth to carefully remove any dust, grime, or debris from the leather's surface. Doing so helps avoid scratching when you begin cleaning.

Remove any large debris. Source: Bayelon

• Use a special leather cleaner: Apply a small quantity of leather cleaner on a soft, damp cloth. To avoid destroying the leather, use a product that is particularly made for it.
• Clean the leather gently: Use the cloth to clean the leather gently in circular motions. Pay attention to areas with stains or grime, and do not scrub too hard since this might harm the leather's finish.
• Let the leather dry: After cleaning, leave the leather phone case air dry entirely. Keep it out of direct sunlight and heat sources to avoid cracking or fading.

Why Cleaning Your Case Is Important?

Phone cases are crucial accessories. They protect our cell phones from many types of damage. Maintaining their cleanliness is just as essential as providing excellent hygiene, operation, and lifespan. Knowing how to clean a dirty clear phone case has various advantages beyond visual appeal.

Hygiene

Dust, grime, bacteria, and even germs can collect on the surface of your case over time. It is especially true if you often use or handle it in different environments. A filthy case can spread harmful particles to your hands and face, raising the risk of illness or skin irritation. 

Thus, cleaning your case keeps it free of hazardous impurities, which promotes a cleaner, healthier lifestyle. You can also reduce your risk of illness by practicing good personal hygiene.

Durability

Dirt and dirt may gradually damage the materials of your case, whether it is made of leather, plastic, or metal. Dust particles or moisture can harm the surface and shorten its longevity. 

Cleaning your phone case to increase its longevity

Cleaning your case frequently helps minimize accumulation, which can lead to wear and tear. As a result, doing so increases its longevity, ensuring that it continues to provide the protection it was built for.

Appearance

The look of your case represents your unique style and attention to detail. However, with time, it may get smeared, scratched, or discolored due to regular use.

Regular cleaning helps maintain its visual appeal, keeping it appearing fresh and new. This not only boosts its visual appeal but also makes a good impression on others, as a well-maintained case displays your professionalism and care.

Functionality

A clean phone case preserves structural integrity. It can effectively protect your smartphone from impacts and scratches. Dirt and grime can choke ports, buttons, and other components, making the case less functional and more challenging to operate. 

Regular cleaning guarantees that all components of the casing function properly, keeping it completely functioning. This way, your case may continue to protect or support your phone without interruption.

Healthier Environment

It is necessary to know how to get a clear phone case clear again. A clean case creates a healthy environment for you and those around you. If left filthy, cases may become a breeding ground for germs or mold, reducing indoor air quality and spreading contaminants to adjacent surfaces. 

You should clean your case routinely

Cleaning your case routinely helps keep a cleaner, healthier atmosphere, whether at home, in the workplace, or when traveling. It minimizes the possibility of germ transmission and provides a more pleasant overall environment.

Frequently Asked Questions

How To Keep A Clear Phone Case Clean?

To keep a clear phone case clean, wipe it down with a gentle microfiber cloth to eliminate dust, fingerprints, and smudges. To deep clean, use warm water and mild dish soap, then gently rinse. You can use a soft-bristled toothbrush to clean away any stubborn debris or yellowing in small crevices. 

Regarding how to clean clear phone case, remember not to use any harsh chemicals as they may cause discoloration or damage. To avoid moisture buildup, fully dry the case with a clean cloth before returning it to your phone. 

How To Whiten A Clear Phone Case?

To whiten a transparent phone cover, soak it in warm water mixed with a few drops of dish soap and a small quantity of baking soda. Allow it to sit for around 30 minutes before using a soft cloth or toothbrush to remove stains and discoloration. 

To deal with severe yellowing, you can add more vinegar if necessary. After cleaning, properly rinse the case with water and allow it to air dry fully. 

How To Clean A Clear Phone Case That Turned Brown?

Use warm water, mild dish soap, and a small amount of baking soda to clean a brown-stained clear phone case. To remove the brown stains, soak the case for about 30 minutes before gently scrubbing it with a soft cloth or toothbrush.

To break down difficult stains, consider using rubbing alcohol. After cleaning, properly rinse the case and let it air dry completely.